Filter
Top Products
30
Audio Setup Menu
1 In disc mode, press SYSTEM MENU.
2 Press 1 2 to select ‘Audio Setup’ icon.
3 Press OK to confirm.
- - AUDIO SETUP PAGE - -
ANALOG OUTPUT
DIGITAL AUDIO SETUP
CD UPSAMPLING
NIGHT MODE
Digital Audio Setup
The options included in Digital Audio
Setup are: ‘Digital Output’ and ‘LPCM
Output’.
1 In ‘AUDIO SETUP PAGE’, press 34 to
highlight {DIGITAL AUDIO SETUP}, then
press 2.
2 Press the 34 keys to highlight an option.
3 Enter its submenu by pressing 2.
4 Move the cursor by pressing the 34 keys
to highlight the selected item.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜
Off: Turn off the digital output.
➜
All: If you have connected your
DIGITAL AUDIO OUT to a multi-channel
decoder/receiver.
➜
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
Helpful Hints:
– If DIGITAL OUTPUT is set to ‘All’, all
audio settings except MUTE are invalid.
– You cannot hear or record the SACD
playback if you use the digital connection.
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
➜
48kHz: Playback a disc recorded at the
sampling rate of 48kHz.
➜
96kHz: Playback a disc recorded at the
sampling rate of 96kHz that can only be
achieved in Stereo-Classic mode.
Helpful Hint:
– LPCM Output can be selected only when
PCM Only is activated.
Setting the analogue output
Set Analogue Output to match your DVD
Player’s playback capability. This function
can also be accessed via the
SURROUND button on the remote.
1 In ‘AUDIO SETUP PAGE’, press 34 to
highlight {ANALOG OUTPUT}, then
press 2.
STEREO
Select this to change channel output to
stereo which delivers sound from only the
two front speakers and subwoofer.
LT/RT
Select this option if your DVD Player is
connected to a Dolby Pro Logic decoder.
VIRTUAL SURROUND
Allows the DVD player to use virtual
surround sound effects.
2 Press 34 to select a setting, then press
OK to confirm your selection.
DVD Setup Menu Options
TIPS:
To return to the previous menu, press 1.
To remove the menu, press SYSTEM MENU.