11EN
English
8 ............ digit keys for direct
channel / track selection.
9
................................ switches the selected
device on / off.
Note
For some TV brands / types, this key will only
turn off the TV. You will have to press a digit
button (direct channel selection) to turn on
the TV again.
3.2 Resettingakeytoitsoriginal
function
If an improved key (
see chapter 2.3.2) still does
not function as expected, you can always reset
the key to its original function.
1
In the current
device mode, keep
digit keys
and
pressed
simultaneouslyfor5
seconds,
until the
red Setup light
lights up.
• The remote control is now in setup
mode.
2
Press digit keys ,
, and ,
in that
order.
• After each key
press the red
Setup light
blinks once.
3
Press the key you
wish to reset twice.
E.g. the 22 key.
• After each key
press the red
Setup light
blinks once.
• The red Setup light
will blink one
more time to confirm that the key was
succesfully reset to its original function.
Usingtheuniversalremotecontrol
5sec.
2x
SRP2003_27__Manual_80_210.indd 11 25-09-09 11:06