Philips SRP2003/27 Universal Remote User Manual


  Open as PDF
of 28
 
13EN
English
HowdoIsettheremotecontrolformyTV/
DVDcombo?
Some combo devices require you to set up
two different source selection keys to control
both parts of the combo device. If you have a
TV / DVD combo, you might need to set up
the remote control for both TV and DVD to
operate your TV / DVD combo.
Operation
Theremotecontroldoesnotwakeup
anymore.
Battery level too low or battery lifetime came
to an end.
• Replace the batteries. See chapter 2.1.
ThedeviceIwanttooperatedoesnotrespond
atall/doesnotrespondtoallofthekey
commands.
• Check if the keys you press are available on
the original remote control of the device.
• Try improving
keys
. See chapter 2.3.2.
Wrong code selected during setup.
• Set up the remote control again for the
device. Always test if the device responds,
before leaving setup mode.
See chapter 2.2.
It may be that the keys that you are trying to use
have a different naming on the original remote
control.
• Try out all keys to find the one(s) you need.
Batteries
WillmysettingsbedeletedwhenIreplacethe
batteries?
No.
All user settings will be retained in the
remote control memory in the remote control
memory for 5 minutes.
Serviceandsupport
SRP2003_27__Manual_80_210.indd 13 25-09-09 11:06
 previous next