Philips SRP2003/27 Universal Remote User Manual


  Open as PDF
of 28
 
12 EN
4Serviceandsupport
4.1 Frequentlyaskedquestions
In this chapter you will find answers to the most
frequently asked questions about your universal
remote control.
Setup
Icannotentersetupmode.
Battery level too low or battery lifetime came
to an end.
• Replace the batteries. For this see chapter
2.1.
Thebrandcodeformydeviceismissinginthe
‘Shortlistofbrands’intheQuickStartGuide.
The ‘Shortlist of brands’ only mentions the most
common TV, DVD and CBL/SAT brands.
• You will find a complete brand list on page
44-55 of this user manual.
•
Use ‘9999’ as 4-digit code in case you cannot
find your brand in the complete brand list.
Note that using ‘9999’ may result in a long
setup (up to 15 minutes).
MyTVswitchesOFFinstep4butdoesnot
switchONagaininstep5.
TVs of some brands (e.g. Panasonic) only switch
ON after a long press on one of the digit keys.
After a long key press in setup mode the remote
control will start trying to improve the key (see
chapter 2.3.2) instead of switching ON the TV.
• In this case, switch ON the TV manually
or use the original remote control for this.
Continue with step 6. After successfully
completing setup, the remote control will
switch ON the TV with a long key press on
one of the digit keys, just as your original
remote control.
Aftersetup,notallkeysworkalexpected.
• Try improving the
key(s)
. See chapter 2.3.2.
SRP2003_27__Manual_80_210.indd 12 25-09-09 11:06
 previous next