Philips SRP5004/86 Universal Remote User Manual


  Open as PDF
of 17
 
6 EN 7EN
Important
Ifyoumadeamistake:
• Pressthedeviceselectionbuttontwicetoexitsetup.
TheredSetuplight
turnsoff.
•
Restartfromthebeginning.
• If the device does not respond at all or not to all of the
button commands or if you cannot find the code for your
brand, enter ‘9, 9, 9, 9’ in step 3 and continue with step 4.
The remote control will now search its full database for a
code that works with your TV. Full database search may
take up to 15 minutes.
• Alternatively you can set up the universal remote control
with the learn feature as described in chapter 3.2.
2.2.1 Settinguptheremotecontrolforotherdevices
(STB,DVDplayer/recorderandVCR)
1 Makesurethedeviceisswitchedonandoperational.
E.g.insertadiscintheDVDplayer/recorderoravideo
cassetteintheVCR.
2 Thenfollowsteps2to6of‘Settinguptheremote
controlforyourTV’.Makesuretousethecorrectdevice
selectionbutton:
, or .
2.2.2 Improvingbuttons
Whencorrectlysetup,theremotecontrolshouldbeable
tooperateallyourdevices.However,whenusingtheremote
controlforthefirsttimeitmightoccurthatsomebuttonsdo
notyetfunctionasexpected.
Inthiscaseyoucanhavetheremotecontrolsearchfor
alternatives.
Note
Improvingbuttonsisnotpossiblewhenthecodewas
foundduringfulldatabasesearch(withcode‘9,9,9,9’).
During initial setup
1 Makesurethereceivingdeviceisabletorespond.
E.g.whenyoutrytorepairthePlaybuttonforyourDVD
player,makesuretoinsertaDVDintotheDVDplayer
otherwisethePlaybuttonisnotabletofunction.
2 Pressthebuttonthatdoesnotfunction,keepitpressed
andimmediatelyreleaseitwhenthedeviceresponds.
Repeatthisforeverybuttonthatdoesnotfunction.
• Ifthebuttonstilldoesnotfunctionasexpected,try
pressingitagainforalongerperiodoftime.
After initial setup
1 Makesurethereceivingdeviceisabletorespond.
E.g.whenyoutrytorepairthePlaybuttonforyourDVD
player,makesuretoinsertaDVDintotheDVDplayer
otherwisethePlaybuttonisnotabletofunction.
2 Selectthedeviceyouwish
tooperate
(e.g.DVD).
Pressthe device
selectionbuttontoselect
DVD.
3 Keepbuttons
and
pressed simultaneously for
5 seconds.
• TheredSetupLED
lightsup.Theremote
controlisnowinsetup
mode.
4
Press and holdthebuttonthatdoesnotfunctionand
immediatelyreleaseitwhenthedeviceresponds.
• Ifthebuttonstilldoesnotfunctionasexpected,try
pressingitagainforalongerperiodoftime.
5 Pressthe device
selectionbuttontwiceto
saveyoursettingsandexit
setupmode.
•
Whennobuttonis
pressedfor5minutes
ormore,theremotecontrolwillexitsetupmode,
automaticallysavingallyoursettings.
Gettingstarted English
5sec.
2x
 previous next