Filter
Top Products
Options
On
Weekly Command Timer
Onscreen display
Off
Initial INPUT
Initial VOL level
1/3
Off
Off
0
0
Maximum VOL level
Off
INPUT lock
Off
Button lock
Off
Remocon User level
Off
Advanced PIP
1/3
Options
Off-timer function
INPUT lock
Studio W/B
Advanced PIP
Display size
Initial VOL level
Maximum VOL level
Initial INPUT
Onscreen display
Off
Off
Off
Off
Enable
On
Off
0
Off
Off
0
21
Advanced PIP
1
2
3
5
Press to display the Setup menu.
Press to select “OSD Language”.
4
6
Notes:
• Advanced PIP corresponding signal
• If “Input lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available.
• Sound output is from the picture which is selected in Audio Out (PIP) (See page 25).
• In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.
• The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of
the pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals
displayed on the main picture and depending on the 2-picture display mode.
• Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.
•
Computer screen picture is displayed in a simplifi ed format, and it may not be possible to discern details on them satisfactorily.
• Following combinations of two analog signals cannot be displayed simultaneously;
Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)
• Refer to each board’s operating instruction for DVI, SDI, HDMI’s corresponding signals.
Sub screen Main screen
NTSC, PAL, SECAM (tuner, video)
525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i,
1250/50i (Component Video, RGB, DVI, SDI, HDMI)
640x480@60Hz, 852x480@60Hz, 1024x768@60Hz,
1366x768@60Hz (RGB, DVI, HDMI)
1280x768@60Hz (DVI)
Note:
To use , , , buttons for the screen operations, follow the procedures in the previous page.
7
(When Advanced PIP is On)
Press to exit from
Options menu.
Press to adjust the
menu.
Off :
Sets normal two
screen display
mode (see page
20).
On :
Sets Advanced
PIP mode.
Press and hold until the Options menu is displayed.
Press to select Advanced PIP.
Press repeatedly.
Each time pressing this button main picture and sub picture
will be displayed as above.
TH-42PS10EK/S
TH-42PH10EK/S, TH-50PH10EK/S,
TH-58PH10EK
One screen Advanced PIP
Main screenSub screen
123
654