Filter
Top Products
Sync
Auto
Sync
on G
Sync
VBS
1/2
PC
Off
Standby save
Off
Power management
Off
Auto power off
Off
OSD Language English
(
UK
)
Component/RGB-in select
RGB
Input label
Signal
Power save
Setup
Sync
P-NR
Signal
Auto
H-Freq.
V-Freq.
kHz
Hz
33.8
60.0
[
RGB
]
Cinema reality
Off
Off
H-Freq.
V-Freq.
kHz
Hz
33.8
60.0
3D Y/C Filter (NTSC)
Colour system
Signal
Auto
Cinema reality
Panasonic Auto (4 : 3)
Off
4 : 3
[
AV
]
P-NR
Off
Refresh Rate
100 Hz
Cinema reality
P-NR
Signal
Off
Off
[
Component
]
Refresh Rate
100 Hz
Cinema reality
P-NR
Signal
Off
Off
H-Freq.
V-Freq.
kHz
Hz
33.8
60.0
[
Digital
]
Refresh Rate
100 Hz
Sync
P-NR
Signal
Auto
H-Freq.
V-Freq.
kHz
Hz
33.8
60.0
[
RGB
]
Cinema reality
Off
Off
Refresh Rate
100 Hz
40
Select Signal from the “Setup” menu during RGB input signal.
Press to adjust.
Setting RGB sync signal:
Confi rm that the input is set to RGB input (this setting is valid only for RGB input
signal).
Auto: The H and V sync or synchronized signal are automatically selected.
If both input, it is selected the H and V sync.
on G: Uses a synchronized signal on the Video G signal, which is input
from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is input
from the HD connector.
Displays the H (Horizontal) / V (Vertical) frequencies.
This display is valid only for RGB / PC and Digital input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
H-Freq. (kHz) / V-Freq. (Hz)
Sync
1
2
Setup for Input Signals
Press ACTION ( ) button
Press to exit from adjust mode.
Refresh Rate (for TH-42PH10EK/S, TH-50PH10EK/S, TH-58PH10EK)
Press to select Refresh Rate.
Press to adjust.
This function sets the refresh rate of the display.
This menu is displayed when the input signal is 50 Hz system (50i, 50p, 25p, 24p, 24sF) of vertical scan rate.
100 Hz: Reduce screen fl icker.
50 Hz: Enhance the resolution of moving images.
Note:
It is recommended to set to 100 Hz normally.
1
2
Press to exit from adjust
mode.