Filter
Top Products
37
Setup for MULTI DISPLAY
ID Remote Control Function
You can set the remote control ID when you want to use this remote control on one of several different displays.
1
2
3
Switch to on the right side.
Press the button on the remote control.
Press one of - , for the tens digit setting.
Press one of - , for the units digit setting.
4
Notes:
• The numbers in 2, 3 and 4 should be set up quickly.
• Adjustable ID number range is 0 - 99.
• If a number button is pressed more than two times, the fi rst two numbers become the ID number for the remote
control.
ID Cancellation
Press button on remote control. (This has the same effect as pressing the , , buttons at the same time.)
Notes:
• Set the Remote ID “On” to operate the ID remote control.
If Remote ID is set to “On”, you can use the remote control without identical ID number during option menu display.
(see page 43, 46)
• The ID remote control cannot be used when ID select is set to anything other than 0, and the remote control ID is
not the same as the ID select number (see page 43, 46).
ID remote control button operation
The operation is the same as normal remote control except for the button.
F (Seam hides video) Setting
Model No. Reference
To hide joints between displays.
Suitable for moving image display.
To show joints between displays.
Suitable for still image display.
TH-42PS10EK/S Step 4, Page 34 (2 × 2, 3 × 3, 4 × 4) (2 × 2F, 3 × 3F, 4 × 4F)
TH-42/50PH10EK/S,
TH-58PH10EK
Step 6, Page 36 On Off