Philips TV Remote Control Universal Remote User Manual


 
12
Use of the menus
& Press the red, green or yellow colour key to display/cancel the PICTURE,
SOUND or FEATURES menu.
é Use the cursor in the up/down, left/right direction to select the menu item.
Use the OK key in the centre of the cursor to activate.
Press the same colour key again to return or to switch menu off.
Picture menu
When you are watching a TV channel in the NTSC-system, or if a NTSC peripheral
is connected to one of the euroconnectors, the option Hue also appears.
Store the modified adjustments for Contrast, Brightness, Colour, Tint, Digital
options and Dynamic Contrast for all TV channels with Store Pers. Pref. in
the
SETUP menu.
Sharpness (Not in VGA mode)
You can adjust the Sharpness for each TV channel separately.
Tint
Select the colour temperature: Normal, Warm or Cool.
Select again when in VGA mode.
Digital Options (not available in VGA mode)
Although Natural Motion is the most ideal setting, it may be preferred to
switch back to Digital Scan and/or 100 Hz.
100 Hz = 100 Hz only (Field flicker reduction)
Not available in Movie Expand picture format.
Dig. Scan = 100 Hz + Dig. Scan (Field and line flicker reduction)
Natural Motion = 100 Hz + Dig. Scan + Natural Motion (Field and line
flicker reduction and smooth movement reproduction)
Dynamic Contrast (not available in VGA mode)
To make the contrast between darker and brighter picture parts more
noticeable, select the Med setting.
In certain circumstances it may be preferred to select Min or Off.
VGA 640 x ...
Switch your computer on.
The selection of the computer display mode ( 640 x350, 640 x 400, 640 x 480)
is made automatically.
If it is necessary you can optimise the position of the picture from your
computer per VGA mode.
Select VGA 640 x ... with the cursor up/down.
Select with the cursor up/down the adjustments of the picture :
V. Shift to adjust the picture position vertically
V. Amplitude to adjust the picture height
H. Shift to adjust the picture position horizontally
H. Amplitude to adjust the picture width
Trapezium to adjust the trapezium distortion
Parabola to adjust the parabola distortion
Press the cursor left/right to alter the selected adjustment.
Now you can select another adjustment with the cursor up/down.
The adjustments made in the
VGA 640 x ... menu are automatically stored after
the menu is switched off.
Note : When the VGA signal becomes > 32 KHz or is not recognisable, the
VGA 640 x ...
menu is removed and the picture menu reappears.
PICTURE
Contrast
Brightness
Colour
Sharpness
Tint
Digital options
Dynamic Contrast
J Contrast L M
PICTURE
Contrast
Brightness
Colour
Tint
Dynamic Contrast
VGA 640 x ...
J Contrast L M
SETUP
Store Pers. Pref.
DVD
Decoder/Descrambler
Information Line
Ext2 Input
VCR Type
Surround Sound Off/Channel 1...7
(Auto Picture/Sound On/Off)
NEX
TV
IEW
Provider None/0.99
Auto Format Yes/No
INSTALLATION
J Store Pers. Pref.
213
B
w
b
æ
Q
b
S j
cd
TV VCR DVD SAT
¬V P
OK key to activate
picture menu
sound menu
features menu
programme list
cursor to select
adjustments
in VGA mode
VGA 640 x ...
V Shift
V Amplitude
H Shift
H Amplitude
Trapezium
Parabola
J V Shift L M
4814.1 gb 19-02-1999 14:06 Pagina 12