Filter
Top Products
4
Automatic Channel Search
1 Switch on the TV set. Press the
AUTOINSTALL
button on
the video recorder. If TV channels have already been
stored, select and confirm the ’AUTOINSTALL’ line.
2 The ’Automatic Channel Search’ starts.
AUTOINSTALL 00
3 Wait until all the TV channels have been found. This may
take several minutes.
4 Adjust ’TIME’ , ’YEAR’ , ’MONTH’ , ’DATE’ .
5 Confirm each entry with the
OK
button.
How you can search for a TV channel manually, you read in
chapter 4 ’SPECIAL FEATURES’, ’Manual channel search’.
How you can allocate a TV channel manually, you read in the
next paragraph, ’Manual channel allocation’.
Manual Channel Number Allocation
You can allocate any desired programme number to the TV
channels stored by the ’Automatic Channel Search’.
1 Switch on the TV set. Press the
AUTOINSTALL
button on
the video recorcer.
2 Select and confirm ’CHANNEL ALLOCATION’ .
3 Use the
P r
or
P q
button, to select the TV channel
on the TV screen, to which you wish to allocate a
programme number (starting with ’P 01’ ).
4 Confirm this allocation.
If you wish to allocate further programme numbers,
repeat step 3and step 4until you allocated a pro-
gramme number to all the required TV channels.
5 To end press the
STANDBY m
button.
Note: If you want to delete an unwanted TV channel,
press the
CLEAR (CL)
button at step 3.
* Monitor function: You can switch to and fro between
TV reception and video recorder reception with the
MONITOR
button. This only functions when you used a
scart cable to connect the video recorder to your TV set
and if your TV set responds to this switch-over.