Filter
Top Products
Initial installation
a Open up the battery compartment of your remote control
and place the batteries in it as shown in the picture.
b Close the battery compartment.
c Confirm the picture on the TV screen with the OK button
on the remote control.
d Select the language for the on-screen display (OSD) with
the P r or P q button.
The display on the video recorder will only show English
text.
e Confirm with the OK button.
’Automatic TV channel search’ starts. This picture will
appear on the screen:
SEARCH 00
Wait until all TV channels have been found. This can take
several minutes.
f When all TV channels have been found, ’READY’ will
appear on the TV screen.
E ’TIME’, ’YEAR’, ’MONTH’, ’DATE’ will appear on the TV
screen.
TIME 20:00
YEAR 1999
MONTH 01
DATE 01
------------------------
-/+ 0-9 OK
g Check if the TIME in line ’TIME’ is correct. If required,
change the time with the number buttons 0-9 on your
remote control.
h Confirm with the OK button.
i Check ’YEAR’, ’MONTH’ and ’DATE’. Confirm each line
with the OK button.
j After you have confirmed the line ’DATE, the video
recorder will switch to standby.
The initial installation is now complete.
DIf you have connected a decoder, you must install it
as described in the next section.
DIf you have connected a satellite receiver, please
read the section ’satellite receiver’.
Allocating a decoder
Some TV stations will send coded TV channels, that you can
only watch when you use a decoder. You can connect such a
decoder (descrambler) to your video recorder. With the
following function, the connected decoder will automatically
be activated for the TV programme you want to watch.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Choose the television channel on which you wish to use
the decoder with the P q or P r buttons on the video
recorder or the number buttons 0-9 on the remote
control.
c Press the MENU button on the remote control. The main
menu will appear.
d Select the line ’MANUAL SEARCH’ with the P q or
P r button.
e Confirm with the OK button.
f Press the INDEXE button. ’DEC’ will appear in the
display.
CH21
g Confirm with the OK button.
2. INSTALLING YOUR VIDEO RECORDER
6