Filter
Top Products
DWhile a programmed recording is being made, you
cannot operate your video recorder manually. If you
want to cancel the programmed recording, press the
TV/STANDBYm button.
DIf the video recorder is switched on a few minutes
before a programmed recording is supposed to
begin, ’TIMER RECORD’ will flash on the TV
screen.
DIf you reach the end of the cassette during a
recording, the video recorder will automatically
eject the cassette.
DIf you forget to load a cassette, ’NO CASSETTE’
will appear on the TV screen and ’k’ will flash on the
video recorder display.
DIf you have put in a cassette which cannot be used
for recording, the video recorder will automatically
eject it.
DIf ’TIMER FULL’ appears on the TV screen when
you press the TIMER button, you have used up all
the available TIMER blocks. If you want to clear or
check a programmed recording (TIMER block),
select it with the P q or P r button.
DProgramme numbers ’E1’ and ’E2’ are for
recordings from other sources (through scart socket
EXT.1 AV 1 or EXT.2AV 2 ).
How to check or change a programmed
recording (TIMER)
a Switch on the TV set and select the programme number
for the video recorder.
b Press the TIMER button on the remote control twice.
c Select the programmed recording (TIMER) you want to
check or change with the P q or P r button.
d Press the TIMER button.
e Select the entry field with the D/Sr or C/Sq
button.
f Change any information with the P r or P q button or
with the 0-9 buttons.
g Confirm with the OK button.
h Make sure that the cassette you have put in can be
recorded on. Switch off with the TV/STANDBY m button.
DThe programmed recording will only function when
the video recorder is switched off with the
TV/STANDBYm button.
DThe video recorder will always record the
programmed recording at the speed you have
selected before the recording starts.
How to clear a programmed recording
(TIMER)
a Switch on the TV set and select the programme number
for the video recorder.
b Press the TIMER button on the remote control twice.
c Select the programmed recording (TIMER) you want to
clear with the P r or P q button.
d Press the CLEAR (CL), y button.
e Confirm with the OK button.
19