Filter
Top Products
11
EN
7.
7.Move the selected channel with or
to the programme number you want
to assign.
8.
8.Confirm with .
9.
9.To assign other TV channels to a programme
number, repeat steps 5 to 8.
10.
10.To end, press
.
Setting the clock
If the display shows an incorrect time or '--:--',
the time and date must be reset manually.
If a TV channel that transmits PDC or the
FASTTEXT is stored under programme number
'P01', time/date will automatically be taken from
the TXT/PDC information.
(SMART CLOCK)
1.
1.Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.Press . The main menu will appear.
3.
3.Select 'INITIAL SET UP' with or
and confirm with .
4.
4.Select 'CLOCK' with or
and confirm with .
5.
5.Check the time in 'TIME'. If required, please
change the time with .
6.
6.Check 'DAY', 'MONTH' and 'YEAR' in the
same way.
7.
7.Choose 'SMART CLOCK' ON or OFF with
.
8.
8.To end, press .
Setting the RF out channel
In some reception locations it is possible that a
TV channel will be sent on the same or similar
frequency as the video recorder.
Result: As soon as the video recorder is
switched on, the reception quality for this or sev-
eral other TV channels will decrease.
The following steps will show you how to change
the pre-set 'transmission' (RF out channel) fre-
quency on the video recorder.
1.
1.Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.Press . The main menu will appear.
3.
3.Select 'INITIAL SET UP' with or
and confirm with .
4.
4.Select 'RF OUT' with or
and confirm with .
5.
5.Press .
6.
6.Press , or to select a
free (not allocated) channel between channel
22 and 69 in your area.
7.
7.Press .
8.
8.To end, press .
STATUS/EXIT
FWD 1- B
0..9
STOP C-LPLAY B-K
FWD 1- B
FWD 1- B
STOP C-LPLAY B-K
FWD 1- BSTOP C-L
PLAY B-K
MENU
STATUS/EXIT
FWD 1- B
0..9
FWD 1- B
STOP C-LPLAY B-K
FWD 1- BSTOP C-L
PLAY B-K
MENU
STATUS/EXIT
FWD 1- B
STOP C-L
PLAY B-K
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
Time/date is displayed incorrectly despite
manual setting
With Smart Clock, time/date is taken from the
TV channel saved on 'P01'.
If you wish to switch this automatic time cor-
rection off, select 'OFF' for Smart Clock.
You can reactivate this function at anytime by
selecting 'ON' for Smart Clock.
What is RF out channel?
This electronic component in the video recorder
allows the device to transmit audio and video
signals via the aerial cable.These signals can
be received on a TV just like TV channels.
What is RF out channel frequency?
This frequency or channel indicates the channel
on which the audio or video signal is transmitted.
SELECT KL CHOOSE B
→RF OUT CH 35
END=EXIT
If you cannot get an interference-free picture
and sound, connect the video recorder and the
TV with a scart cable. Then, switch the built-in
modulator off.
Press repeatedly until '--' appears
next to 'RF OUT CH' on the TV screen.
Then confirm with .
FWD 1- B
STOP C-L
HG491/495BD(EN).qx3 03.12.19 9:54 PM Page 11