Filter
Top Products
9
EN
8.
8.To end, press .
The decoder has now been allocated to this pro-
gramme number.
Manual TV channel search
In some cases it can occur that all TV channels
are not found and saved during the first installa-
tion. In this case, the missing or coded TV chan-
nels must be searched for and stored manually.
1.
1.Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.Press .The main menu will appear.
3.
3.Use or to select 'TUNER
SET UP'. Then press .
4.
4.Use or to select 'MANU-
AL TUNING'. Then press .
5.
5.Select 'PROG.' with or
.
Then
press .
6.
6.With or
or
, select
the desired programme number that you want
to use for the TV channel, e.g. 'P01'. Then
press .
7.
7.Select 'CHANNEL' with or
, and confirm with .Then
enter the desired channel with
.
If you set
'
SKIP
'
on for a channel, this channel
will be ignored when going through the channels
with or .
8.
8.Save the TV channel with .
9.
9.To search for other TV channels, begin again
at step 5.
10.
10.To end, press
.
Using the satellite receiver
Satellite channels from a satellite receiver (con-
nected to the scart socket AV2 (DECODER)) are
received on the video recorder. Select pro-
gramme number 'AV2' with
0.0.2
.
You should select the satellite channels to be
received by the satellite receiver directly on the
receiver itself.
Follow TV (Automatic TV channels
sorting)
When the automatic channel search function is
activated, the TV channels are saved in a specific
order. This may vary from the order of TV chan-
nels on the TV.
This function changes the order of TV channels
saved in the video recorder to match that of the
TV.
Make sure that the video recorder and the TV
are connected by a scart cable.
1.
1.Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.Press .The main menu will appear.
3.
3.Select 'TUNER SET UP' with
and confirm with .
4.
4.Select 'FOLLOW TV' with or
and confirm with .
5.
5.'P:01' will appear and '01' will flash in the
video recorder display.
6.
6.Select programme number '1' on the TV.
FWD 1- B
STOP C-L
PLAY B-K
FWD 1- B
STOP C-L
PLAY B-K
MENU
STATUS/EXIT
FWD 1- B
P–
P
+
0..9
FWD 1- B
STOP C-L
PLAY B-K
FWD 1- B
0..9
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
FWD 1- B
STOP C-LPLAY B-K
MENU
STATUS/EXIT
MANUAL TUNING
→PROG. P55
CHANNEL 055
DECODER [OFF]
SKIP [OFF]
SELECT
KL CHOOSE B
END=EXIT
I don’t know the channels for my TV stations
In this case, press or in
'CHANNEL' to start the automatic channel
search. A changing channel number will appear
on the TV screen. Continue the automatic
search until you have found the desired TV
channel.
STOP C-LPLAY B-K
SELECT KL CHOOSE B
AUTO TUNING
MANUAL TUNING
→FOLLOW TV
MOVE
END=EXIT
I cannot switch my TV to programme num-
ber '1'
If you have connected additional devices to
socket AV2 (DECODER), please disconnect
these devices. Because of other connected
devices, the TV could switch to the programme
number of the scart socket.
HG491/495BD(EN).qx3 03.12.19 9:54 PM Page 9