Filter
Top Products
15
EN
Automatic controlled recording from
a satellite receiver (RECORD LINK)
This function automatically starts recording on
the switched-off video recorder when a video sig-
nal is recognised through the connected scart
cable. If your satellite receiver has a programming
function, the recording will start automatically (as
long as the satellite receiver is switched on).
1.
1.Use a scart cable to connect scart socket
AV2 (DECODER) on the video recorder to
the corresponding scart socket on the satel-
lite receiver.
2.
2.Switch on the TV. If required, select the pro-
gramme number for the video recorder.
3.
3.Press .The main menu will appear.
4.
4.Select 'RECORD SET UP' with or
and confirm with .
5.
5.Select 'RECORD LINK' with or
.
6.
6.Select function 'ON' with .
7.
7.
To end, press .
8.
8.Insert a cassette.
9.
9.Programme the satellite receiver with the
required information (programme number of
the TV channel, start time, end time).
If necessary, please see the operating
instructions for your satellite receiver.
10.
10.Switch off the video recorder with
.
The video recorder is now ready to record. The
beginning and end of the recording is controlled
via scart socket AV2 (DECODER).
'DIRECT RECORD'
With DIRECT RECORD, you can record the
right TV channel in seconds even if your video
recorder is switched off. If the recording is start-
ed manually, the video recorder uses the current
TV channel set on the TV.You will find more
information on how to switch DIRECT RECORD
on or off in the next section. Make sure that your
video recorder socket (AV1/TV) and the TV are
connected by a scart cable.
1.
1.On the TV, select the programme number
you want to make the recording from.
2.
2.Press with the video recorder
switched off.
3.
3.Stop recording with .
STOP C-L
REC I
STANDBY/ON
yy
STATUS/EXIT
FWD 1- B
STOP C-L
PLAY B-K
FWD 1- B
STOP C-L
PLAY B-K
MENU
SELECT KL CHOOSE B
RECORD SPEED [SP]
DIRECT RECORD [OFF]
→RECORD LINK [OFF]
END=EXIT
How does DIRECT RECORD work?
The video recorder compares the TV channel
selected on the TV with its stored TV channels via
the scart cable. If the same TV channel is found, it
switches the video recorder to the corresponding
programme number and starts recording. Please
do not change the TV channel on the TV during
the search so as not to affect the process.
Switching off 'RECORD LINK'
To switch off the function, select 'OFF'
with
.
FWD 1- B
HG491/495BD(EN).qx3 03.12.19 9:54 PM Page 15