Filter
Top Products
Selecting the recording speed (SP or LP)
You can reduce the recording speed by half. This makes it
possible to record, for example, eight-hours instead of
four-hours on an ’E240’ (four-hour) cassette.
a Switch on the TV set and, if required, select the
programme number for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’RECORDING FUNCTIONS’ with the
P = or ;P button, and confirm with the P button.
d Select the line ’RECORD SETTINGS’ with the P= or
;P button, and confirm with the P button.
e Select the line ’RECORDING SPEED’ with the P= or
;P button.
f Select the required recording speed with the Q or
P button.
D’LP’: Long Play = half recording speed (double
recording time).
’SP’: Standard Play = normal recording speed.
DThe picture quality will be adversely affected when
recording at half recording speed (’LP’).
DFor playback, the correct recording speed will
automatically be selected.
g Confirm with the OK button.
h To end, press the MENU button.
Automatic recording from a satellite
receiver (SAT RECORDING)
You can only use this function, when you have a satellite
receiver, which can control other equipment by a
’programming’ function through a scart cable.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’RECORDING FUNCTIONS’ with the
P = or ;P button, and confirm with the P button.
d Select the line ’RECORD SETTINGS’ with the P= or
;P button, and confirm with the P button.
e Select the line ’SAT RECORDING’ with the P= or
;P button.
f Select the required scart socket ’E1’or’E2’ with the
Q or P button.
If you want to switch off the function, select ’OFF’ with
the P or Q button.
g Confirm with the OK button.
h Use a scart cable to connect the scart socket you
selected on the video recorder ( EXT.1 AV 1 or
EXT.2 AV 2 ) to the corresponding scart socket on the
satellite receiver.
i Insert a cassette.
DThe cassette is being checked. Wait until the search
symbol in the display has gone out.
j Switch off with the STANDBY m button. The video
recorder is now ready to record. The beginning and end
of the recording is controlled via one of the scart sockets.
DWhen this function is switched on and the video
recorder is switched off, ’x’ will appear on the
video recorder display.
21