Filter
Top Products
Changing the TV system
If you play back recordings made on a different kind of tape
(for example, NTSC standard), the automatic TV system
switch-over may lead to colour interferences. You can switch
off the ’automatic TV system switch-over’ as follows.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’SPECIAL SETTINGS’ with the P= or
;P button and confirm with the P button.
MAIN MENU
SPECIAL SETTINGS
TV SYSTEM AUTO
CHILD LOCK OFF
OSD MODE AUTO.
16:9 WIDE SCREEN OFF
VCR 1 OR 2 VCR 1
REPEAT PLAY OFF
AUTO STANDBY ON
DEMO OFF
________________________________
TO EXIT
PRESS MENU
d In the line ’TV SYSTEM’ select the required TV system
with the Q or P button.
e Confirm with the OK button.
f To end, press the MENU button.
DIf colour interference still occurs, you can switch to
’B/W’ (black and white) in line ’TV SYSTEM’.
Child lock
This function will prevent unauthorised use of your video
recorder. All button-functions will be locked.
DYou can make programmed recordings while the
child lock is on.
a Switch on the TV set. If required, select the programme
number for the video recorder.
b Press the MENU button. The main menu appears.
c Select the line ’SPECIAL SETTINGS’ with the P= or
;P button and confirm with the P button.
MAIN MENU
SPECIAL SETTINGS
TV SYSTEM AUTO
CHILD LOCK OFF
OSD MODE AUTO.
16:9 WIDE SCREEN OFF
VCR 1 OR 2 VCR 1
REPEAT PLAY OFF
AUTO STANDBY ON
DEMO OFF
________________________________
TO EXIT
PRESS MENU
d In the line ’CHILD LOCK’ select ’ON’ with the Q or
P button.
e Confirm with the OK button.
f To end, press the MENU button.
’’ appears in the video recorder display.
Keep the remote control in a safe place.
g If you want to switch off the child lock, select ’OFF’in
line ’CHILD LOCK’. ’’ disappears from the video
recorder display.
DIf a button is pressed with activated child lock, ’’
flashes in the display for a few seconds.
You may also activate the child lock with the remote control.
Press the STANDBYm button on the remote control for a few
seconds, until ’’ appears in the video recorder display.
Switch the child lock off in the same way.
8. ADDITIONAL FUNCTIONS
27