Filter
Top Products
13
En
01
5 FL DIMMER – Each time this is pressed, the
brightness of the front panel display changes and/or
the lighting status of the indicators on the front panel
switches as shown in the table below.
CD/SACD – For hybrid discs, press to switch between
the CD and SACD layers.
6TOP MENU – Press to display the top menu of the BD-
ROM or DVD-Video.
7 NETFLIX – (page 40)
8 HOME MEDIA GALLERY – (page 35)
9 /// – Use to select items, change settings
and move the cursor.
ENTER – Press to execute the selected item or enter a
setting that has been changed, etc.
10 HOME MENU – (page 41)
11 REV – (page 28)
12 PLAY – (page 27)
13 // – (page 28)
14 PAUSE – (page 27)
15 Number buttons – Use these to select and play the
title/chapter/track you want to view or listen to and to
select items from menus.
16 CLEAR – Press to clear the numeric number, etc.
17 DISPLAY – (page 30)
18 FUNCTION – (page 33)
19 Remote control LED – Lights when a command is
sent from the remote control. Flashes while the TV
band code is being set.
20 OPEN/CLOSE – Press to open and close the disc
tray.
21 RECEIVER CONTROL
22 SUBTITLE – (page 30)
23 ANGLE – (page 29)
24 HDMI
BDP-53FD – Use to switch HDMI Mode alternately
(pages 17 and 43).
BDP-52FD – Use to switch the resolution of the video
signals output from the HDMI OUT terminal
(page 43).
25 EXIT – (page 40)
26 POP UP MENU/MENU – Press to display the
BD-ROM or DVD-Video menus.
27 RETURN – Press to return to the previous
screen.
28 Color buttons – Use these to navigate BD-ROM
menus.
PROGRAM – (page 29)
BOOK MARK – (page 29)
ZOOM – (page 29)
INDEX – (page 29)
29 FWD –
(
page 28)
30 // – (page 28)
31 STOP – (page 27)
32 2nd VIDEO – (page 31)
33 2nd AUDIO – (page 30)
34 A-B – (page 28)
35 ENTER – Press to execute the selected item or enter a
setting that has been changed, etc.
36 REPEAT – (page 28)
37 SKIP SEARCH – Press to skip 30 seconds ahead when
SKIP SEARCH is pressed during playback.
38 REPLAY – Press to jump back 10 seconds when
REPLAY is pressed during playback.
Note
• This remote control unit is equipped with two ENTER
buttons (9 and 35 listed above).
• To operate an AV receiver equipped with a remote
control mode setting using the RECEIVER CONTROL
buttons, set the AV receiver’s remote control mode to
“1”. For details, see the AV receiver’s operating
instructions.
Front panel
display
Indicators
Blu-ray
(BDP-53FD only)
PQLS FL OFF
Bright Lights Lights Off
Middle Lights Lights Off
Dark Lights Lights Off
Off Off Off Lights
BDP-52FD_UCXCNSM_IBD_EN.book Page 13 Friday, September 30, 2011 9:59 AM