Pioneer DV-266-S DVD Player User Manual


 
Audio Settings menu
07
46
En
Chapter 7
Audio Settings menu
Audio DRC
Default setting:
Off
When watching Dolby Digital DVDs at low
volume, it’s easy to lose the quieter sounds
completely—including some of the dialog.
Switching Audio DRC (Dynamic Range
Control) to On can help by bringing up the
quieter sounds, while controlling loud peaks.
How much of a difference you hear depends
on the material you’re listening to. If the mate-
rial doesn’t have wide variations in volume,
you may not notice much change.
1 Press HOME MENU and select ‘Audio
Settings’ from the on-screen display.
2 Highlight Audio DRC, then use the
/
(cursor left/right) buttons to change
to ‘On’ or ‘Off’, as required.
3 Press ENTER to make the setting and
exit the Audio Settings screen.
Audio DRC is only effective with Dolby
Digital audio sources.
Audio DRC is only effective through the
digital output when
Digital Out
(see
page 50) is set to
On
, and
Dolby Digital
Out
(see page 51) is set to
Dolby Digital
> PCM
.
The effect of Audio DRC depends on your
speakers and AV receiver settings.
Virtual Surround
Default setting:
Off
Switch on Virtual Surround to enjoy surround
sound effects from just two speakers.
When you play a Dolby Digital soundtrack,
TruSurround technology from SRS produces
a deep, realistic 3D soundspace from a pair of
stereo speakers. SRS TruSurround is a
process approved by Dolby Laboratories for
Virtual Dolby Digital sound.
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
Video Adjust
HOME MENU
DVD
Audio Settings
Audio DRC
Virtual Surround
Off
Off
DV260.book 46 ページ 2003年1月28日 火曜日 午後7時20分