Filter
Top Products
Initial Settings menu
09
53
En
jacks. If you want to display video on more
than one monitor simultaneously, make
sure that it is set to
Interlace
. See also
Setting the TV system
on page 68.
• If you connect a TV that is not compatible
with a progressive scan signal and switch
the player to progressive, you will not be
able to see any picture at all. In this case,
switch everything off and reconnect using
the supplied video cable (see
Easy
connections
on page 12), then switch
back to
Interlace
. Switch the player to
standby then, using the front panel
controls, press
STANDBY/ON
while
pressing
to switch the player
back to
Interlace
.
•
Taiwan model and when TV system is set
to
AUTO
or
NTSC
only:
When set to
Progressive
, PAL and NTSC discs are
both output as progressive NTSC video.
See page 68.
•
When TV System is set to
PAL
only:
Progressive
cannot be selected. See
page 68.
Compatibility of this unit with
progressive-scan TVs.
This player is compatible with progressive
video Macro Vision System Copy Guard.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPAT-
IBLE WITH THIS PRODUCT AND MAY CAUSE ARTI-
FACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT
IS RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE “STANDARD DEFINITION”
OUTPUT. IF THERE ARE QUESTIONS REGARDING
OUR TV SET COMPATIBILITY WITH THIS MODEL
525p DVD PLAYER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
This player is compatible with the following
Pioneer displays and monitors: PDP-503HDG,
PDP-433HDG progressive scan-compatible
TVs.
S-Video Out
You only need to make this setting if you
connected this player to your TV using an S-
video cable.
• Default setting:
S2
If you find that the picture is stretched or
distorted on the default
S2
setting, try
changing it to
S1
.
STANDBY/ON
FL DIMMER
DV-366-S/ DV-366-K
STANDBY/ON
Digital Audio Out
Video Output
Language
Display
Options
TV Screen
Component Out
S-Video Out
S1
S2
Initial Settings
DV260.book 53 ページ ２００３年１月２８日 火曜日 午後７時２０分