Pioneer DV-636D DVD Player User Manual


 
10
= 7 (stop) button
Press to stop playback. Pressing once enables
playback to resume from a point shortly before the
location where it stopped. Pressing twice causes the
disc to return to the beginning of the disc if playback
starts again.
~ 8 (pause) button
Press during playback to pause. Press again to
resume playback (page 42).
! 3 (play) button
Press to start or resume playback.
@ ¡ ¢ (forward) button
Press to advance to chapters/tracks. Press and hold
to perform fast-forward scanning (page 27).
# 4 1 (reverse) button
Press to go back to previous chapters/tracks. Press
and hold to perform reverse playback scanning (page
27).
$ Disc illumination
Lights when a DVD is loaded and when no disc is
loaded. Turns off when a disc format other than DVD
is loaded in the player.
% Disc tray
When loading a disc, place discs in the disc tray with
the label side facing up (pages 25, 28).
^ FL DIMMER button
Press to change the brightness of the FL display and
disc illumination in four steps: maximum brightness,
medium brightness, minimum brightness, and off.
When the FL display is turned off, the “FL OFF”
indicator lights.
& SUBTITLE button
Press repeatedly to select one of the subtitle
languages programmed on a DVD or to turn the
subtitles off (page 36).
* AUDIO button
Press repeatedly to select one of the audio
languages programmed on a DVD (page 37).
For Video CD and CD, each press changes the audio
output as follows.
( VIRTUAL DOLBY DIGITAL button
Press to turn the Virtual Dolby Digital function on and
off (page 41).
) POWER switch (except for Taiwanese model)
Press to switch the player on or off (pages 25, 28).
_ STANDBY/ON button (Taiwanese model
only)
Press to switch the player on or to put in standby
(pages 25, 28).
CENTER SURROUND
AUDIO SUBTITLE FL
DIMMER
SUB
WOOFER
5.1CH
MODE
4 ¢
DVD PLAYER
3
7
8
0
Î
FL OFF5.1CH
VIRTUAL DOLBY
DIGITAL
VIRTUAL
DOLBY
DIGITAL
DOLBY DIGITAL/DTS DECODER
STANDBY/ON
ACOUSTIC DAMPER MECHANISM
9
7
8
6
2
0
-
=
~
!
@
%
$
^
_
3
4
5
#
&
*
(
Taiwanese model
=
Stereo = 1/L (Left) = 2/R (Right)