Filter
Top Products
Connecting up
02
17
En
English
audio is not output through these jacks, so
this connection should be in addition to,
rather than instead of, a 5.1 channel analog
connection.
You’ll probably also want to connect a video
output to your AV receiver. You can use any of
the video outputs available on this player (the
following illustrations show a standard
(composite) connection).
Connecting using the multichannel
analog outputs
If your AV receiver has 5.1 channel analog
inputs, we recommend connecting this player
to it using the multichannel analog outputs.
Doing this will ensure that you can enjoy all
kinds of disc, including Dolby Digital and DTS
DVD-Video discs, as well as high sampling
rate and multichannel DVD-Audio and SACD
discs.
• In order to be able to hear multichannel
sound from SACDs, DVD-Video and DVD-
Audio discs, you need to set
SACD
Playback
to
Multi-ch Area
, and the
Audio Output Mode
to
5.1 Channel
(see
SACD Playback
on page 71 and
Audio
Output Mode
on page 73).
1 Connect the AUDIO OUT (5.1ch)
outputs on this player to the multi-
channel audio inputs on your AV receiver.
It’s convenient to use three stereo audio
cables; one for the
FRONT
, one for the
SURROUND
and one for the
CENTER
and
SUBWOOFER
channels.
2 Connect the VIDEO OUT jack on this
player to a video input on your AV
receiver.
• Alternatively, you can use the S-Video or
component video connections if they’re
available.
AUDIO
OUT
(2ch)
AUDIO
OUT
(5.1ch)
CONTROL
OPTICAL
COAXIAL
IN OUT
R
L
L
R
CENTER
SUB
WOOFER
SURROUND
FRONT
S-VIDEO
OUT
VIDEO
OUT
COMPONENT VIDEO OUT
PB PR
Y
21
2
1
(AUDIO)
S400
DIGITAL AUDIO
OUT
HDMI OUT
AV COAV CONNECTOR 1 (RGB)-TV/AV Receiver
AV receiver
MULTI-
CH. INPUTS
AUDIO
OUT
(2ch)
AUDIO
OUT
(5.1ch)
CONTROL
OPTICAL
COAXIAL
IN OUT
R
L
L
R
CENTER
SUB
WOOFER
SURROUND
FRONT
S-VIDEO
OUT
VIDEO
OUT
COMPONENT VIDEO OUT
PB PR
Y
21
2
1
(AUDIO)
S400
DIGITAL AUDIO
OUT
HDMI OUT
AV CO
AV CONNECTOR 1 (RGB)-TV/AV Receiver
AV receiver
VIDEO
INPUT
868en.book.fm 17 ページ ２００３年８月１９日 火曜日 午前９時３０分