Filter
Top Products
Getting Started
04
36
En
Playing discs
The basic playback controls for playing DVD,
CD, SACD, Video CD/Super VCD and MP3
discs are covered here. Further functions are
detailed in the next chapter.
• Throughout this manual, the term ‘DVD’
means DVD-Video, DVD-Audio and DVD-
R/RW. If a function is specific to a
particular kind of DVD disc, it is specified.
1 If the player isn’t already on, press
POWER to switch it on.
If you’re playing a DVD or Video CD/Super
VCD, also turn on your TV and make sure that
it is set to the correct video input.
2 Press
OPEN/CLOSE to open the disc
tray.
3 Load a disc.
Load a disc with the label side facing up,
using the disc tray guide to align the disc.
Never load more than one disc at a time.
4 Press
(play) to start playback.
If you’re playing a DVD or Video CD/Super
VCD, a menu may appear. See
DVD disc
menus
on page 37 and
Video CD/Super VCD
PBC menus
on page 38 for how to navigate
these.
If you’re playing an MP3 disc, it may take a
few seconds before playback starts,
depending on the complexity of the file
structure on the disc.
Basic playback controls
The table below shows the basic controls on
the remote for playing discs. The following
chapter covers more playback features in
more detail.
E/
E/
SETUP
DISPLAY AUDIO SUBTITLE ANGLE
TOP MENU
OPEN /
CLOSE
MENU
– MULTI SPEED +
ENTER
VIDEO
ADJUST DIMMER
JOG MODE
V.A DJ
FL JOG
PLAY MODESURROUND
873
4¢ 1¡
0987
ENTER
654
C321
CLEAR
TV CONTROL
Button
What it does
Starts playback.
DVD and Video CD/Super VCD: if
the display shows
RESUME
,
playback starts from the resume
point.
Pauses a disc that’s playing, or
restarts a paused disc.
868en.book.fm 36 ページ ２００３年８月１９日 火曜日 午前９時３０分