Filter
Top Products
10
En
Connecting Up2
Easy Setup
This easy setup is the minimum set of connec-
tions you need to start watching DVD video
discs. Both sound and picture are fed directly
to your TV using the supplied audio and video
cables. For other possible connections, see
pages 11 and 12.
Connecting
audio and video
cables
Be sure to insert each
plug fully for the best
connection. The plugs
and jacks are colour-
coded to make connection easier.
Connecting control cables
Use a stereo mini-plug cable (not supplied) to
connect the CONTROL OUT of your Pioneer
amplifier/receiver to the CONTROL IN of this
unit. This allows you to operate this unit with
the amplifier/receiver’s remote control. See
the instruction manual that came with your
amplifier/receiver for more detailed instruc-
tions. Add more components to the chain by
connecting the CONTROL OUT of this unit to
the CONTROL IN of other Pioneer compo-
nents.
Important
• In order to properly ground this player, you
must connect at least one cable (not
including an optical cable) in addition to the
control cable.
• If the CONTROL IN jack on the player’s rear
panel is connected to the CONTROL OUT
jack of another Pioneer component, point
the remote control at the other component
to operate the player.
Important
Before making or changing any rear panel connec-
tions, make sure that all components are switched
off and unplugged from the wall outlet.
AC IN
VIDEO
OUT
S-VIDEO
OUT
D1 / D2
OPTICAL
IN
OUT
COAXIAL
SUB
WOOFER
CENTER
SURROUNDFRONT
1
P
R
P
B
Y
2
1
1
2
L
L
R
R
2
AUDIO OUT
(5.1CH)
DIGITAL OUT CONTROL
AUDIO OUT
(2CH)
COMPONENT VIDEO OUT VIDEO OUT
1
23
AC IN
Connect to a composite video input
on your TV using the supplied
yellow video cable.
Plug into a standard AC
wall outlet.
Connect to a pair of stereo audio inputs
on your TV using the supplied red/white
stereo audio cable.
There is no D-
Video jack on the
DV-47A.
DV-47A AC Inlet.
DV-S733A