Filter
Top Products
27
GETTING STARTED USING YOUR DVD PLAYER
En
Resuming playback from
where you stopped
- DVD-Video/Video CD
Use the resume feature to restart playback from the
point that the disc was stopped last time.
Press STOP 7 once.
The display shows “RESUME” and the stop position is
memorized.
• The resume position remains memorized as long as
the disc is in the player — even if you switch the
power off.
• Pressing STOP 7 twice causes the disc to return to
the beginning when PLAY 3 is pressed again. The
display shows the disc type (DVDs or Video CDs).
Press PLAY 3.
Playback starts from the resume position.
Notes
• The actual restart position may be slightly before or after
the resume position.
• If you want to remove the disc, but still want to resume
playback from the last stopped position, use the LAST
MEMORY feature instead (page 59).
• Resume is not possible with DVD-Audio discs.
0
4
¢
1
¡
7
0
8
3
Stopping Playback and
Switching Power Off
– DVD/Video CD/CD
SEARCH MODESTEP / SLOWRETURN
PREVIOUS NEXT REV FWD
PAUSEPLAY
VIDEO
ADJUST
DIMMER JOG MODE
TOP MENUSET UP
DISPLAY AUDIO SUBTITLE ANGLE
OPEN /
CLOSE
FUNCTION
MEMORY
STOP
PROGRAMREPEATRANDOM
0987
+
10
654
C321
CLEAR
MENU
ENTER
V.ADJ
FL
F.MEM
JOG
873
A-B
4¢ 1
eE
¡
AUDIO
/
VIDEO
4(4)
1
2
3
1, 2
1 Press STOP 7 (7/0 on the front panel).
Playback stops.
2 Press OPEN/CLOSE (7/0 on the front
panel).
The disc tray comes out.
3 Remove the disc.
4 Press STANDBY/ON on the front panel
(
on the remote control). (DV-S88A)
The disc tray goes back in.
4 Press on the remote control. (DV-S838A)
The disc tray goes back in.
5 Press POWER on the front panel to turn
the player’s power off. (DV-S838A)
4(5)