Filter
Top Products
08Basic Adjustment Settings
English
31
En
Using Auto Search
Use Auto Search when you just want TV channels to be
automatically searched and set up.
1
Press HOME MENU.
2
Press / to select “Setup”, and then press
ENTER.
3
Press / to select “Program Setup”, and then
press ENTER.
• The password entry screen appears. Enter your
4-digit password using buttons 0 – 9.
4
Press / to select “Auto Search”, and then press
ENTER.
5
Press / to select “Country”, and then press
/ to select your country.
Auto Search
Channel Allocation
Search
Country
West Asia Area
Start
Cable (US Type)
6
Press / to select “Channel Allocation”, and
then press / to select “Normal”, “Air (US
Type)”, or “Cable (US Type)”.
• The table in page 65 shows which option you
should usually select in your country or region.
Item Description
Normal Scans to locate your regional broadcasting
frequencies. The earlier the frequencies
identified, the smaller the channel
numbers used.
Air (US Type) Searches for the same broadcasting
frequencies as for receiving over air in the
U.S. This selection is effective when the
system is receiving over air.
Cable (US Type) Searches for the same broadcasting
frequencies as for watching cable TV in the
U.S. This selection is effective when the
system is receiving from a cable TV
company.
Auto Search
Channel Allocation
Search
Country
West Asia Area
Start
Cable (US Type)
7
Press / to select “Start”, and then
press ENTER.
• Channel search automatically starts.
•To quit channel search in progress, press
RETURN.
8
Press HOME MENU to exit the menu.
• If no channel is found, check the antenna connec-
tions, and then retry Auto Search.
Setting up TV channels manually
This section describes how to set up TV channels
manually.
Using Manual Adjust
Use Manual Adjust to set up TV channels manually.
Steps 5 to 9 differ depending on your selection for
Channel Allocation.
1
Press HOME MENU.
2
Press / to select “Setup”, and then press
ENTER.
3
Press / to select “Program Setup”, and then
press ENTER.
• The password entry screen appears. Enter your
4-digit password using buttons 0 – 9.
4
Press / to select “Manual Adjust”, and then
press ENTER.
5
Press / to select “Program Entry”, and then
press / to select a program number.
•With “Normal” selected, you can select 1
through 99.
•With “Air (US Type)” selected, you can select 2
through 69.
•With “Cable (US Type)” selected, you can select
1 through 125.