Filter
Top Products
11 Useful Adjustment Settings
58
En
Select a screen size
Manual Selection
Press f to switch among the screen size options
selectable for the type of video signals currently re-
ceived.
• Each time you press f, the selection is switched.
• The selectable screen sizes differ depending on the
types of input signals.
AV mode
Item Description
4:3 For 4:3 “standard” pictures. A side mask appears
on each side.
FULL 14:9 For 14:9 squeeze pictures. A thin side mask
appears on each side.
CINEMA 14:9 For 14:9 letterbox pictures. A thin side mask
appears on each side, and you may also see bars
on the top and bottom with some programs.
WIDE In this mode the picture is progressively stretched
toward each side of the screen.
FULL For 16:9 squeeze pictures.
ZOOM For 16:9 letterbox pictures. Bars may appear on
the top and bottom with some programs.
CINEMA For 14:9 letterbox pictures. Bars may appear on
the top and bottom on some programs.
PC mode except for XGA signals
Item Description
4:3 Fills the screen without altering the input signal
aspect ratio.
FULL Full 16:9 screen display
Dot by Dot Matches input signal with same number of screen
pixels.
PC mode for XGA signals
(Ex. 1024 × 768 input at PDP-505HDG)
Item Description
4:3 Matches input signal with the same number of
screen pixels.
Optimized for 1024 × 768 display
FULL1 Full 16:9 screen display
Optimized for 1024 × 768 display
FULL2 For wide signal display
Use when displaying 1280 × 768 signal resolution.
• The specifications given for the PC mode is for the
PDP-505HDG. For the PDP-435HDG, the number of
panel pixels is different, and thus signal processing
and actual viewing conditions will vary slightly.
AV mode
PC mode except for XGA signals
PC mode for XGA signals
FULL
4:3
FULL 14:9
CINEMA14:9
WIDE
4:3
Dot by
Dot
FULL
4:3
FULL2 FULL1
CINEMA
ZOOM