E-14
Watching TV
Plasma Display
Media Receiver
Off
Flashing red
Red
Green
Plasma Display status indicators
Power off
Media Receiver does not turn on or its power cord is disconnected.
The Plasma Display System is in standby mode.
The Plasma Display System turns the power on.
Media Receiver status indicators
Power off
Only the Media Receiver is in standby mode or the Plasma Display System is in standby mode.
The Plasma Display System turns the power on.
STANDBY/ON
MAIN POWER
STANDBY/ON
INPUTSTANDBY/ON VOLUMECHANNEL
Power indicator
POWER
STANDBY/ON
MEDIA RECEIVER
PDP-R03U
PUSH
PLASMA DISPLAY SYSTEM
POWER
Power indicator
TV
ANT INPUT
SURR
FRONT
AV
SELECTION
MTS CC
SPLIT
SELECT
SUB SUB CH
FREEZE
MODE
SCREEN
SLEEP LEARNEDIT/
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
0
CH
ENTER
Turning on the power
1 Press MAIN POWER on the Plasma Display.
• The power indicator on the Plasma Display flashes red.
2 Press POWER on the Media Receiver.
• The System turns the power on.
• The power indicators on the Plasma Display and Media
Receiver lights up green.
• If the power indicators still light up red, press TV a on
the remote control unit or STANDBY/ON on the Plasma
Display to turn the System on.
First time turning on Media Receiver
1 Press POWER on the Media Receiver.
• The power indicator on the Media Receiver lights up
red.
2 Press MAIN POWER on the Plasma Display.
• The System turns the power on.
• The power indicators on the Plasma Display and Media
Receiver lights up green.
• If the power indicators still light up red, press TV a on
the remote control unit or STANDBY/ON on the Plasma
Display to turn the System on.
A
• In this manual, “System” mean the Plasma Display Panel and
Media Receiver.
Turning off the power
1 Press TV a on the remote control unit or STANDBY/
ON on the Plasma Display.
• The System enters standby mode and the image on
the screen disappears.
• Both power indicators change from green to red.
2 Press POWER on the Media Receiver.
• The power indicator on the Media Receiver turns off
and the one on the Plasma Display flashes red.
3 Press MAIN POWER on the Plasma Display.
• The power indicator on the Plasma Display turns off
after approximately 5 seconds.
A
• If you are not going to use this System for a long time, be sure to
remove the Power cord from the power outlet.
Off
Red
Green