Filter
Top Products
E-37
Using external equipment
Option
MENU
Input Select
INPUT3 [AUTO]
AV-Y/C
RGB
AUTO
COMPONENT
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
(GRAY)
RS-232C
IN
OUT
CONTROL
AC INLET
SYSTEM
CABLE
(WHITE)
YP
B
P
R
S-VIDEO VIDEO R-AUDIO-L
YP
B
P
R
S-VIDEO
ANT/CABLE 75ΩOUT
COMPONENT VIDEO COMPONENT VIDEO
VIDEO R-AUDIO-L
AB
INPUT 1
INPUT 2
RGB INPUT
INPUT 3
MONITOR OUTPUT
Media Receiver (rear view)
Digital tuner
Watching broadcasts via a Digital tuner
Connecting a Digital tuner
You can use the INPUT 3 terminal when connecting a Digital tuner and other audiovisual equipment.
Displaying broadcasts via a Digital tuner
When connecting to the INPUT 3 terminal, select
“INPUT3” and set the correct input signal type on “Input
Select” in the menu. (See page 43.)
The setting is stored and can be selected on the
“INPUT SOURCE” menu.
To watch a Digital tuner image, select “INPUT3” from
the “INPUT SOURCE” menu using INPUT on the
remote control unit or on the Plasma Display. (See page
43.)
A
• Each time INPUT is pressed, the input source toggles.
• If the Digital tuner image does not come in clearly, you
may need to change the input signal type setting on the
“Input Select” menu.
• Refer to your Digital tuner operation manual for the signal
type.
• RGB INPUT cannot connect to a PC. (Input resolution is
compatible with 1080I and 540P.)
• Use the PC INPUT terminals on the front of the Media
Receiver when connecting a computer.(See page 39.)
Component video cable
(commercially available)
TV
ANT INPUT
SURR
FRONT
AV
SELECTION
MTS CC
SPLIT
SELECT
SUB SUB CH
FREEZE
MODE
SCREEN
SLEEP LEARNEDIT/
DISPLAY
INPUT
TV VCRCBL
/SAT
/DTV
DVD
/LD
123
456
789
0
CH
ENTER
AV cable
(commercially available)
S-video cable
(commercially available)
RGB cable (commercially available)
When using RGB cable, select
"RGB" for "Input Select" in the menu.
When using component
video cable, select
“COMPONENT” for
“Input Select” in the
menu.