Pioneer PDP 504CMX Flat Panel Television User Manual


 
32
En
Other Operations
English
Other Operations
3 Use the 5/ buttons to select [ENERGY SAVE].
MENU INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
:
ORBITER OFF
:
MASK CONTROL ON
:
AUTO SET UP MODE INACTIVE
:
AUTO FUNCTION OFF
:
AUDIO OUT FIXED
STANDARD
LANGUAGE ENGLISH
CHANGE EXIT
PICTURE SCREEN SETUP OPTION
4 Press the SET button to select [ENERGY SAVE]
setting.
The factory default setting is [STANDARD].
Each time the SET button is pressed, the setting
changes as follows:
÷ STANDARD ... Brightness is controlled in
accordance with input signal to
produce bright, easily viewed image.
÷ MODE1 ......... Brightness is controlled in
accordance with input signal, but
power consumption is less than that
used in [STANDARD] mode.
÷ MODE2 ......... Brightness is controlled in accordance
with input signal, but power
consumption is less than that used in
[MODE1].
÷ MODE3 ......... Brightness is set at fixed level,
regardless of input signal level.
Effective at reducing screen aging
due to burned lag images, etc.
÷ AUTO ............ Brightness is set automatically in
response to ambient lighting
conditions so as to produce optimum
image appearance.
5 When finished with the setting, press the MENU
button to return to the normal screen image.
Note
The [ENERGY SAVE] setting affects all input sources.
3 STANDARD
MODE2 2
MODE1 2
3 AUTO
MODE3 2
MENU
2/3
5/
SET
MENU
5/
SET
2/3
Main unit operating
panel
Remote control unit
Automatic input switching
(AUTO FUNCTION)
This display is equipped with an optional [AUTO
FUNCTION] selector. When enabled, the selector
automatically switches the displays input source to INPUT1
when an image signal is detected at the INPUT1 terminal.
1 Press the MENU button to display the menu
screen.
MENU INPUT1
ENTER
SET
EXIT
MENU
PICTURE SCREEN SETUP OPTION
:
0
:
0
:
0
:
0
:
0
:
0
CONTRAST
:
0
BRIGHTNESS
R.LEVEL
G.LEVEL
B.LEVEL
H.ENHANCE
V.ENHANCE
PICTURE RESET
2 Use the 2/3 buttons to select [OPTION].
MENU INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
:
ORBITER OFF
:
MASK CONTROL ON
:
AUTO SET UP MODE INACTIVE
:
AUTO FUNCTION OFF
:
AUDIO OUT FIXED
STANDARD
LANGUAGE ENGLISH
ENTER EXIT
PICTURE SCREEN SETUP OPTION
3 Use
the 5/ buttons to select [AUTO FUNCTION].
SET
MENU
MENU INPUT1
:
:
ENERGY SAVE
SCREEN MGT.
:
OFF
:
ORBITER OFF
:
MASK CONTROL ON
:
AUTO SET UP MODE INACTIVE
:
AUTO FUNCTION OFF
:
AUDIO OUT FIXED
STANDARD
LANGUAGE ENGLISH
CHANGE EXIT
PICTURE SCREEN SETUP OPTION