Filter
Top Products
09 Basic Adjustment Settings
42
En
Setting for skipping unwanted channels
From among conventional TV channels searched and
set up using Auto Channel Preset, you can select
channels to be skipped when CH +/– are operated.
1
Press HOME MENU.
2
Press / to select “Setup”, and then press
ENTER.
3
Press / to select “Channel Setup”, and then
press ENTER.
4
Press / to select “Channel ADD/DEL”, and then
press ENTER.
5
Press / to select “Antenna”, and then
press / to select “A” or “B”.
Channel ADD/DEL
Channel
Add/Delete
Antenna
2
Add
A
6
Press / to select “Channel”, and then
press / to select a channel to be skipped.
Channel ADD/DEL
Channel
Add/Delete
Antenna
Add
A
2
7
Press / to select “Add/Delete”, and then
press / to select “Delete”.
Channel ADD/DEL
Channel
Add/Delete
Antenna
A
2
Delete
8
Press HOME MENU to exit the menu.
•To restore skipped channels, use the above procedure
except that you select “Add” in step 7.
• When using the Cable Converter, you may need to
manually add Cable Converter output channels.
PDP-ELITE-Eng (40-56) 9/9/03, 11:4542