Filter
Top Products
11Enjoying through External Equipment
65
En
IN
SERVICE ONLY
MONITOR OUT
DIGITAL OUT
OPTICAL
INPUT 1
COMPONENT VIDEO
S400
DTV-ANTENNA
IN
INPUT 3
VCR
CONTROL
A ANTENNA/CABLE B
OUT
IN
IN
OUT
CONTROL
OUT
S-VIDEO
S-VIDEO S-VIDEO
R-AUDIO-L R-AUDIO-L Y
AC INLET
BLACK
WHITE
SYSTEM CABLE
R-AUDIO-L R-AUDIO-L Y
C
B/PB
CB/PB
CR/PR
CR/PR
VIDEO
VIDEO VIDEO
INPUT 2
(TS)
Watching a DVD image
Connecting a DVD player
Use the INPUT 1 terminals when connecting a DVD
player and other audiovisual equipment.
Displaying a DVD image
To watch a DVD image, press INPUT 1 on the remote
control unit or press INPUT on the Plasma Display to
select INPUT1.
DVD player
You can connect many types of external equipment to
your Plasma Display System, like a DVD player, VCR,
personal computer, game console, and camcorder.
To view images coming from external equipment, select
the input source using the INPUT buttons on the
remote control (page 16) or the INPUT button on the
Plasma Display.
Media Receiver (rear view)
AV cable (commercially available)
Component Video cable
(commercially available)
S-Video cable (commercially
available)
•To protect all equipment, always turn off the system
before connecting to a DVD player, VCR, personal
computer, game console, camcorder, or other exter-
nal equipment.
•Refer to the relevant operation manual (DVD player,
personal computer, etc.) carefully before making
connections.
•Refer to your DVD player operation manual for the
signal type.
• The INPUT 1 terminals are checked for cable connec-
tions in the order where; 1) Component Video,
2) S-Video, 3) Video.
• Connect external equipment to only terminals that
are to be actually used.
•You can also use the INPUT 3 terminals when con-
necting only with the Component Video output
terminals on a DVD player.
PDP-ELITE-Eng (65-80) 9/9/03, 11:4665