Filter
Top Products
10 Electronic Program Guide (EPG) (for DTV Only)
60
En
4
Press / to select “OK”, and then press ENTER.
• The program is preset and the schedule table is
restored.
•A blue square icon appears for the preset
program.
•A black icon appears for overlapped
presetttings.
5
Press DTV GUIDE to exit the Program Guide.
With the system switched on, a channel switch
alarm message approximately 30 seconds before
execution and the channel is switched a short
time before the start of the program.
• Auto channel select is not executed when the system
is in the standby mode.
•Finish presetting operations one minute before the
start of the program; otherwise presettings may fail.
•For priorities about overlapped presettings, see
“Priority rules for overlapped presettings” on page 63.
Recording TV programs using a D-VHS
recorder
Use the following procedure to preset TV programs for
recording with a connected D-VHS recorder.
1
Press DTV GUIDE.
• The EPG screen appears.
2
Press / and / to select a program to be
preset, and then press ENTER.
• Select a program not yet started.
•A setup menu appears.
EPG
******* 8:30 PM – 10:00 PM
*******
*******
Reservation Setting Program View Program Rec
******
3
Press / to select “Program Rec”, and then
press ENTER.
EPG
******* 8:30 PM – 10:00 PM
*******
*******
Reservation Setting Program View Program Rec
******
•A dialog box for mode selection appears.
4
Press / to select “i.LINK”, and then press
ENTER.
EPG
******* 10:00 PM – 11:30 PM
*******
*******
Reservation Setting Program View Program Rec
******
Recording Type ANALOG i.LINK
•A dialog box for model selection appears.
PDP-ELITE-Eng (57-64) 9/9/03, 11:4660