Filter
Top Products
Setting up the receiver06
38
En
Choosing your receiver setup
To ensure the best possible surround sound, be
sure to complete the following set up
operations. This is particularly important when
using Dolby surround. You only need to make
these settings once (unless you change the
placement of your current speaker system or
add new speakers, etc.). Refer to the following
pages for details on each of the settings.
If you are using the Pioneer S-FCRW220
speaker system, you’ll have to set the
Crossover frequency to 200kHz. You can
leave the Speaker setting and the
Subwoofer setting in the default settings.
CHANNEL
ENTER
ENTER
MPX/RETURNDTV INFO
DTV ON/OFF DTV MENU
D.ACCESS T.EDIT/GUIDE
ST
TUNE
T
P
S
E
U
TUNE
ST
CLASS
FL DIMMER
BAND
TOP MENU AUDIO
SUB TITLE
REMOTE SETUP
RECEIVER CONTROL
STANDARD ADV.SURR.
STEREO
ANGLE
1¡
4
¢
7
8
3
¶
LEVEL
DVD VCR CD-RTV
RCV
TUN
TVC
CD
TEST TONE
CH SELECT
INPUT ATT
INPUT SEL.
MUTE
MIDNIGHT/
LOUDNESS
SIGNAL SEL
MULTI CONTROL
EFFECT DISPLAY
DISC
+10
RECEIVER
SOURCE
1
2
3
4
5
6
7
8
9
0
1 Press RECEIVER to turn the power
on.
The STANDBY indicator goes out.
2 Press RCV.
3 Use } or ] to choose the option you
want to adjust.
It will be easiest to adjust each of the settings in
turn, following the order below (and on the
following pages). The current setting is shown
for each option as you cycle through the
display.
Speaker setting (page 39)
Specify the number and type of speakers
you have connected.
Surround back speaker setting (VSX-
D811S only) (page 40)
Specify your surround back speaker/
surround back subwoofer setup.
6.1 channel setting (VSX-D811S only)
(page 40)
Set when 6.1 channel decoding is used.
Subwoofer setting (page 40)
Specify how the subwoofer is used.
Crossover frequency setting (page 40)
Determine which frequencies will be sent
to the subwoofer (or large speakers).
LFE attenuator setting (page 41)
Specify the peak level for the LFE channel.
Front speaker distance setting (page 41)
Specify the distance from your listening
position to your front speakers.
Center speaker distance setting (page
41)
Specifies the distance from your listening
position to your center speaker.
Surround speaker distance setting (page
41)
Specify the distance from your listening
position to your surround speakers.
Surround back speaker distance setting
(VSX-D811S only) (page 42)
Specifies the distance from your listening
position to your surround back speakers.
XRB3013A.38.44 01.12.12, 4:46 PM38