Filter
Top Products
Controls and Displays04
28
En
2 DIGITAL
Lights when a Dolby Digital signal is
detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS audio
signals is detected.
2 DTS
When the Standard mode of the receiver is on,
this lights to indicate decoding of a DTS signal.
3 2 DIGITAL
When the Standard mode of the receiver is on,
this lights to indicate decoding of a Dolby
Digital signal.
4 2 PRO LOGIC II
When the Standard mode of the receiver is on,
this lights to indicate Pro Logic II decoding.
5ATT
Lights when INPUT ATT is used to attenuate
(reduce) the level of the analog input signal.
6 DIRECT
Lights when source direct playback is in use.
This function bypasses all tone, balance,
Advanced surround, and Dolby Surround
effects.
7 MIDNIGHT
Lights during Midnight listening.
8 MONITOR
Lights when MONITOR is selected (page 48).
9 Speaker indicator
Shows the speaker system currently in use.
10 Character display
11 Neo:6 (VSX-D811S)
Lights during NEO:6 processing
12 ADV. SURR (Advanced Surround)
Lights when one of the Advanced Surround
modes has been selected.
13 LOUDNESS
Lights when LOUDNESS has been selected.
14 TUNER indicators
STEREO:
Lights when a stereo FM broadcast is being
received in auto stereo mode.
MONO:
Lights when the mono mode is set using the
MPX button.
TUNED:
Lights when a broadcast is being received.
15 Master volume level
Shows the overall volume level. ---dB indicates
the minimum level, and
−−
−−
−0 dB indicates the
maximum level.
Depending on your level settings for each
channel, the maximum level can range between
–10 dB and –0 dB.
XRB3013A.26.31 01.12.12, 4:43 PM28