Pioneer VSX-D711 TV Cables User Manual


 
Using the tuner
07
47
En
Naming station presets
For easier identification, you can name your
station presets.
1 Choose the station preset you want to
name.
See Listening to station presets (this page) for
how to do this.
2 Press T.EDIT (TUNER EDIT).
The display shows ST. NAME, then a blinking
cursor at the first character position.
3 Input the name you want.
Names can be up to four characters long.
Use the MULTI JOG/INPUT SELECTOR dial
(front panel) or the ST +/- buttons (remote)
to select characters.
Press ENTER to confirm a character. If no
character is input, a space is input.
The name is stored when ENTER is
pressed after choosing the fourth
character.
To erase a station name, simply repeat steps
1-3 and input four spaces instead of a
name.
Once you have named a station preset, you
can press DISPLAY when listening to a
station to switch the display between the
name and the frequency.
Listening to station presets
Having stored up to 30 stations (see previous
page), preset stations can be easily recalled.
1 Press TUN (remote) or use the MULTI
JOG/INPUT SELECTOR dial on the front
panel to select the tuner.
2 Press CLASS to select the class in which
the station is stored.
Press repeatedly to cycle through classes A, B
and C.
3 Press ST +/ (STATION +/) to select the
station preset you want.
If the receiver is left disconnected from the
AC power outlet for an extended period,
the station memories will be lost and will
have to be reprogrammed.
XRB3013A.45.48 01.12.12, 4:48 PM47