Filter
Top Products
7
Before First Use
Installation
AC-IN
External OSD
Connector
External OSD Control Box
Power Plug
AC Power Cord
DVI Connector
RGB Connector
DVI Cable
(not included)
RGB Cable
Connect to the
computer’s
connectors
Connect the Computers
Before doing anything, make sure the Power Switch on the monitor and a computer are
turned off.
1
Plug the cable(s) into the connector on the monitor securely and fix
them in place with two screws (each).
2
Plug the other end of the cable(s) into the connector on a computer.
3
Plug the AC Power Cord into the AC-IN on the monitor.
4
Plug the Power Plug into an outlet.
5
Plug the External OSD Control Box if necessary.
6
Switch on the monitor before starting up a computer.