Filter
Top Products
Adjust preset description
In PTZ control mode, press REC/SHOT key, and press the preset number (three numeric
keys), DVR will adjust the corresponding preset number. Repeat pressing REC/SHOT key,
and press the preset number, DVR will adjust that preset number.
When you exit PTZ control mode, the camera will stay at the current position.
Note The PTZ preset number is set already. Please refer to PTZ menu for preset setup. V1.4
firmware can support 128 preset numbers at most.
Start/Stop auto in PTZ control mode
In PTZ control mode, press PLAY/AUTO key to start PTZ auto function. Press
PLAY/AUTO key again to stop.
When PTZ is in auto mode, if you exit PTZ control mode, PTZ will continue auto
function.You must enter into PTZ control mode again, and press PLAY/AUTO key to stop.
Exit PTZ control mode
Press ESC or ENTER to exit and return preview mode.
Page 25