Filter
Top Products
Step 4 Alarm trigger record channel setup
You can select channels to record for each alarm input. In the sub menu, you can use
ENTER or EDIT key to enable record channel. “ ” means disable and “9 means enable.
Note In order to trigger the channel to record, in “Recording” menu, you must enable
recording and select record type as “Alarm” or other related type. Please refer to
chapter 5.12.
Step 5 Schedule for alarm handle method
When there is external alarm happened in the schedule, DVR will response according to the
handle methods.
Step 6 Alarm handle method
You can select one or more handle method “On Screen Warning”, “Audible Warning”,
“Upload to Center” and “Trigger Alarm Output”.
Description If “On Screen Warning” is enabled, when there is external alarm happened and
DVR is in preview mode, DVR will pop-up the related camera. If you trigger
more than one camera, DVR will pop-up them one by one every 10 seconds.
When the external alarm is disappeared, DVR will restore preview mode.
Step 7 Save setup
In “Alarm in Handling” sub menu, press “Confirm” button and return “Alarms” menu. In
“Alarms” menu, press “Confirm” button to save the parameters.
Step 8 PTZ Linkage
Move “Active Frame” to “PTZ Linkage” button, press ENTER key to enter into “PTZ
Linkage” setup menu
Page 61