Filter
Top Products
Step 2 Select the files that you want to backup
In the file list box, use or keys to move the scroll bar. When the scroll bar stays at
the file you wan to backup, press EDIT key to select it. The symbol “9” is the selection tag.
You can use the same method to select other files you want to backup. After finish, you can
do next step.
Step 3 Select backup device
Please confirm the backup device USB flash memory, USB HDD, USB CD-R/W or IDE
CD-R/W, and select the corresponding backup device.
Step 4 Start and finish backup
Move “Active Frame” to “Save” button and press ENTER key to start backup.
When backup is started, corresponding message box will pop-up to indicate the result.
Backup video segment
You also can backup the image segments when the image is being playback. The steps are
1) Enter into the interface of playback the files or playback by time;
2) Press EDIT key to start selecting the current playback image, and press EDIT again
to stop selecting. This segment is slected;
3) You can repeat step 2 to select many segments. 30 segments can be selected in all;
4) After you select all segments, press ESC key, a message window will pop-up. If you
press “Confirm” button, DVR will start to backup the selected segments. If you press
“Cancel” button, DVR will abort backup.
Note The backup function is effective when two channels are playback synchronously. In
such case, each channel can backup 30 segments so 60 segments can be backup for
two channels.
Playback the video segment
You can use our file player software to playback the video segment in PC. You can find the
player software in attached CD.
Exit playback interface
Please refer to chapter 4.6.
Page 32