Filter
Top Products
Remote Control – TV Mode:
(1) POWER button - Press to enter or exit the standby
mode.
(2) 0~9 Number buttons - Press to select numbers.
(3) MTS button - In TV mode, press to shift among SAP,
Mono or Stereo mode.
(4) VOL +/- button - Press to increase or decrease the
volume.
(5) MUTE button - Press to turn on or off the speaker
output.
(6) Input button - Press to enter the Input menu, then use
the▲▼button to select mode: Tuner, AV1 (Composite),
AV2 (Composite), AV3 (Component), AV4 (Component),
VGA, HDMI, DVD, press the Enter button to enter the
selected mode.
(7) Direction buttons (▲▼◄►) - In the setup menu,
press the ▲▼button to select the desired items, press
the ◄► button to adjust or set.
(8) Enter button - Press to confirm selection or exit the
setup in the setup menu.
(9) Sleep button - press to set the sleep time.
(10) TV button - Press to shift to TV mode.
(11) Signal button - Press to display the ATSC signal status.
(12)
button - Press number buttons to select channel and
then press the button to confirm and go the selected
channel.
(13) +10/- button - In TV mode, press the number buttons
to select channel first, then press this button and add
number button “0” or one number from “1~5” to select
analog or digital TV program. Add “0” for analog TV
program, add one number from “1~5” for digital TV
program.
(14) Last button - In TV mode, press to return to the
channel last viewed.
(15) CH /button - In TV mode, press to select channel.
(16) Freeze button - Press to freeze the current picture.
(17) Menu button - Press to enter or exit the system setup
menu.
(18) Exit button - Press to exit system setup menu.
(19) CC button - Press to display among CC1, CC2, CC3, CC4
or CCD function OFF.
(20) Info. Button - Press to display the current mode
information on the screen.
10