Filter
Top Products
- 17 -
TV Function
Use the ▼, ▲ buttons to select the item you want to set.
Use the ►, ◄ buttons to enter the item and to select.
Press the ► button on the remote control to exit from the setup menu.
Press the ◄ button on the remote control to return to the picture setup menu.
Signal
Use the ► direction button to select CATV TV signal input mode.
Use the ◄ direction button to select AIR TV signal input mode.
Channel
Use the ►, ◄ buttons to change the channel. In CATV input mode, you can select
channels from 2 to 125; in AIR input mode, you can select channels from 2 to 69.
Skip
When the ► button is pressed to turn the function ON, it will skip the current channel
when using CHANNEL +/-or ▼, ▲ to select channels.
When the ◄ button is used to turn the function OFF, it will play the channels in
sequence when selecting under normal playback status.
Fine Tuning
Use the ▼, ▲ buttons to select Fine Tuning, and then press the ►, ◄ buttons to tune
forward or backward from the current channel
Auto Memory
Use the ▼, ▲ buttons to select Auto Memory, press the OK button to enter auto
memory mode:
SEARCHING CH：009
EXIT：
◄
-----------------------------------------------