Filter
Top Products
- 7 -
Front Panel
Front Panel Drawing
1. POWER button
Press to access to or exit the STANDBY
mode.
2. TV button
Press to enter TV mode. Or under TV
mode, press to display the current
channel number on the display panel.
3. FM button
Press to enter FM radio mode.
4. AM button
Press to enter AM radio mode.
5. AV button
Press to enter external AV input mode.
6. 16:9/4:3 button
Press to shift the aspect radio between
16:9 and 4:3.
7. Remote Sensor
Receives remote control signal for
operation.
8. Display panel
Display the time, status, radio frequency
and radio station number.
When adjusting volume, the VOL and
volume level will be displayed on the
display panel for several seconds.
9. SEEK – button
Under radio mode, press once to fine
tune frequency backward. Press for
about 1.5 seconds to search radio
stations backward automatically.
10. SEEK + button
Under radio mode, press once to fine
tune frequency forward. Press for about
1.5 seconds to search radio stations
forward automatically.
11. MUTE button
Press to turn on or off the speaker
output. The corresponding information
will be displayed on the display panel.
12. TIME button
Press it once to display the time on the
display panel. In standby status, the time
is still displayed on the panel.
Press it again to set the time on the
display panel. Use the buttons to
select the editing position of hour or
minute, and then use the buttons to
adjust the value of the hour or minute
upward and downward.
13. SET button
Press to enter and exit from the timer
setup menu. Or Press to memorize the
station under AM/FM status.
14. ▲
Press to select items in the setup menu.
Press to select channels or radio
stations forward under TV or radio mode.
Press to adjust the value upward when
setting the time on the display panel.
15. OK button
Press to confirm selections in setup
menu.