Polaroid SVGA 270 Projection Television User Manual


 
1-22
SPECIFICATIONS
Item Specification
Product name Liquid crystal projector
Model CP-S220W
Liquid
crystal
panel
Panel size 1.8 cm (0.7 type)
Drive system TFT active matrix
Pixels 485,616 pixels (604 horizontal x 804 vertical)
Lens Zoom lens F=2.0 ~ 2.3 f=18 ~ 21 mm
Lamp 130 W UHB
Speaker 0.7 W
Power supply AC100 ~ 120V, 2.0A / AC220 ~ 240V, 0.9A
Power consumption 200 W
Temperature range 0 ~ 35°C (Operating)
Size 289 (W) x 70 (H) x 210 (D) mm
Weight (mass) 2.38 kg or less
INPUT
signal
RGB
Video: Analog 0.7Vp-p, 75 terminator (positive)
H/V. sync.: TTL level (positive/negative)
Compound sync.: TTL level
D-sub 15-pin shrink jack
7 Ground Green
8 Ground Blue
9 -
1 Video input Red 10 Ground
2 Video input Green 11 -
3 Video input Blue 12 DDC jack
4 - 13
H. sync./ Compound sync.
5 Ground (DDC) 14 Vertical sync
6 Ground Red 15 DDC jack
VIDEO 1.0Vp-p, 75 terminator, RCA jack
S-VIDEO
Brightness signal: 1.0Vp-p, 75 terminator
Color signal: 0.286Vp-p (burst signal), 75 terminator
Mini DIN 4-pin jack
AUDIO
200mVrms, 47 k or less (max. 3.0Vp-p)
Stereo mini jack (Speaker output is L/R mixed.)
CONTROL signal D-sub 15-pin shrink jack
NOTE : These specifications are subject to change without notice.
Table 1-11. Specifications