Filter
Top Products
Instruction Manual
8
Pi
cture
Tint . . . . . ! . . . . . 00
Brightness . . . . . ! . . . . . 32
Contrast
. . . . . ! . . . . . 32
Color . . . . . ! . . . . . 32
Sharpness . . . . . ! . . . . . 32
FUNCTIONS & FEATURES
Turn On/Off
1. Turn On
Plug in the power cord, and the TV should enter into Standby mode. Pressing STANDBY key will turn on the TV and its
power indicator light.
2. Standby
While the TV is on, press the STANDBY key will put the TV in Standby or off mode. The power indicator light on the TV set
will turn off.
Basic Functions
Changing the Channel
While in Tuner mode, press the CH +/ - keys to change the channel, or use the numeric keypad to enter a new channel.
Adjusting the Volume
To adjust the volume, press the VOL +/ - keys. Also, you may press the FUNCTION (F) key along with the VOL +/ - keys to
adjust the volume in increments or decrements of 4.
Muting the Volume
To mute the volume, press the MUTE key. To restore the volume, press MUTE again or press the VOL + key.
Function Selection Menus
To change the setting of any function, press the MENU key to bring up the main menu. Press the up or down arrow key to
highlight the desire sub-menu and press the left or right arrow key (or ENTER key) to access. While in the sub-menu, use
the up or down arrow key to select the item and the left or right arrow to adjust the setting. Press the MENU key to return to
the main menu and exit.
While in the setup menu, CH-/+ and VOL-/+ key on the front panel will function as the down/up/left/right arrow keys on the
remote control.
Picture Menu
Features
This menu allows you to adjust the various picture settings. Use the up or down arrow key
to move between the various settings, and the left or right arrow key to adjust them.
Tint: -31 (more purplish to +31 (more greenish)
Brightness
: 0 (dimmest) to 63 (brightest)
Contrast
: 0 (minimum contrast) to 63 (maximum contrast)
Color
: 0 (minimum color) to 63 (maximum color)
Sharpness
: 0 (minimum sharpness) to 63 (maximum sharpness)