Filter
Top Products
11
Using the P.LOCK menu
Using the SETUP menu (continued)
Note:
1. When you enter P.LOCK submenu first time, red “NEW CODE” will display on the
menu, input four-digit numbers as your password by pressing 0-9 buttons. After
you input the numbers, blue “ENTER CODE” will display on the menu, input
again the password you have set to enter P.LOCK submenu, the submenu will
display as the following:
2. If you have set your password, when you want to enter P.LOCK submenu, the
menu will display blue “ENTER CODE” shown as figure 1, input your password
to enter the submenu shown as figure 2.
3. If you need to modify your password, first enter the submenu shown as figure 1,
then press CODE button on the remote control, the “OLD CODE” will display in
red on the menu; Input your old password, then “NEW CODE” will display in red
on the menu, input four-digit numbers as your new password. “ENTER CODE”
will display in blue on the menu, input your new password to enter the submenu
shown as figure 2. If you forget your password, input 4769 to enter the submenu
and renew your password.
Figure 1
Figure 2
CH LOCK
Select this item to enter CH LOCK submenu (as shown). You can set to lock one channel in
this submenu.
LOCK ON: Turn on CH LOCK.
OFF: Turn off CH LOCK.
CH AIR: Select the channel you want
to lock, you can use
VOL button
or number buttons to input channel number.
Note: “CH CABLE ***” will be displayed under CABLE mode.
CH LOCK ON: The selected channel in the CH LOCK menu cannot be viewed.
OFF: LOCK is deactivated and any selected channel for CH LOCK, can be viewed.