Polaroid TTM-2004 CRT Television User Manual


 
6
Basic operation
Connect to AC outlet
Insert the mains wire plug of the unit into 120V AC outlet, unplug the AC cord when the
unit will not be used for a long period time.
How to power on/off
You can turn on the power by using the POWER button at TV front panel (or the
POWER button on the remote control).
Non-signal power-off in 10 minutes
If the unit doesn’t receive a signal state, the TV will enter standby mode automatically
in 10 minutes. To turn it on, press the POWER button on the remote control.
Note: Under AV mode, this function only activates when you set BLUE BACKGROUND.
Change channels
You can change channels by using the PROG.
/ button on the front of the TV (or the
PROG. / button on the remote control). When ANTENNA is set as AIR, you can also
access the channel by using a 2-digit number button combination on the remote
control. When ANTENNA is set as CABLE, use a three-digit number button combina-
tion on the remote control to select the channel. For channels between 20 and 99,
input a two-digit number button to select the channel you want to watch.
Volume UP/DOWN
You can adjust the sound by using VOL / button on the front of the TV (or the VOL
/ button on the remote control).
Sleep function
1. Press TIMER button on the remote control to display the set 120,90,60,30,0
minutes to play until shut off. The unit will be automatically turn off when the sleep
time has elapsed.
2. To cancel the TIMER function, press the TIMER button repeatedly until display
changes to 0.