Filter
Top Products
16
EN
Searching for a tape position with
picture (scanning)
1.
1.While a cassette is playing, press
(reverse) or (forward) one or more
times.
2.
2.Press to resume playback.
Still picture / slow motion
1.
1.During playback, press to stop the
tape and display a still picture.
2.
2.During playback, press to play the
tape in slow motion.
3.
3.Press to resume playback.
Scanning and still/slow motion interferes with the
picture quality. The sound is switched off. This is
not a fault in your video recorder.
Searching for tape position without
picture (forward wind and rewind)
1.
1.Stop the tape with .
2.
2.Press (reverse) or (forward).
3.
3.To stop the tape, press .
Automatic search for a tape position
(index search)
Every time a tape is recorded an index marking
is written on the tape.
These marked positions can be found again
quickly and easily later.
1.
1.To search for the previous marking, press
and then .
2.
2.For the next marking, press and
then .
3.
3.As soon as the video recorder finds this
marking, it automatically switches to play-
back.
Changing the picture setting with
Smart Picture [VR830, VRQ45]
You can change the picture setting while a tape
is playing.
1.
1.Press . This will show the cur-
rent picture setting.
2.
2.Press again to select the pic-
ture setting of your choice.
‘NATURAL’: for all types of movies (natural pic
ture.)
‘DISTINCT’: for fast movement, sport (detailed
picture)
‘SOFT’: for hired tapes (interference is sup-
pressed)
‘SHARP’: for cartoons (sharp picture)
This setting will not change until you ejected the
cassette.
Manual Tracking
To manually adjust the tracking during playback
and slow motion playback, press
or .
Tracking will return to Automatic Tracking
Adjustment when you press , insert a tape,
or press .
To remove vertical jitter in a Still picture, press
or .
P-
P+
PROGRAMME
-
PROGRAMME
+
KB
LC
P-P+
PROGRAMME
-
PROGRAMME
+
SMART PICTURE
SMART PICTURE
B1
INDEX
33
s0
INDEX
33
LC
B1
s0
LC
KB
SLOW
STILL
2
KB
B1
s0
VR630/07 02.2.6 10:13 AM Page 16