Filter
Top Products
Installation Instructions Page 7
LPFM1532
Step 1. Secure the cover plate to the flat panel
using four (4) Phillip screws (supplied).
Step 2. The slotted opening must be facing up
and the flat surface touching the flat
panel surface.
Recessed VESA 75mm/100mm Pattern
Mounting
Hardware
Cover
Plate
Securing
Screw
Mounting
Point
Flat Panel
Universal Spacer
Mounting
Hardware
Slotted Opening
DO NOT OVERTIGHTEN THE
MOUNTING SCREWS
DO NOT OVERTIGHTEN THE
MOUNTING SCREWS
Step 1. If you have a recessed VESA 75mm/
100mm pattern or need more spacing
between the wall and the flat panel, use
the appropriate number of universal
spacers and corresponding length
mounting hardware.
Universal spacer stacking is
limited to five (5) spacers max for
each mounting screw.
Cover Plate Installation
Adapter Plate Installation (Optional)
The optional adapter plate can be used if the flat panel has
200mm x 200mm or 200mm x 100mm mounting points (please see
Page 10).
Step 1. Line up the side holes on the adapter plate with the
side holes on the cover plate.
Mounting Hole
M6 x 8mm Phillips
Head Screws
Cover Plate
Mounting Hole