Filter
Top Products
Installation Instructions Page 9
LPFM1532
200 x 100 Installation
Mounting
Hardware
LPFM1532
Stacked Universal
Spacers
Mounting
Hardware
Flat Panel Installation
Solid Surface
Cinder
Block
Step 1. Lower the flat panel onto the wall plate so
that the mounting tab is inserted into the
mounting slot.
Mounting
Slot
Mounting
Tab
Do not release the display until you are
sure the flat panel is resting securely on
the wall plate.
Step 2. Secure the two plates by inserting and
tightening two (2) M6 x 75mm Phillips
head locking screws located at the
bottom of the cover plate. Use a Phillips
head screwdriver to tighten these
screws.
M6 x 75mm Phillips
Head Screws
Solid Su
r
fa
c
e
Ci
n
der Bl
o
c
k
Screwdriver
The cover plate mounting slot must
be facing up.